Chat with us, powered by LiveChat

KLINE Innovations Exhaust – Porsche 997.1 Turbo


Exhaust Material (Required)

Add Kline Exhaust Manifolds

Add Kline Carbon Fiber Exhaust Tips

Upgrade To 76/70mm For More Sound and Applications Over 650/700hp

Add HJS Cats

Add Cobb Accessport (Required)

Add a Brentuning T-Shirt

Add Brentuning License Plate Frame

Product Description

The 997 turbo was our primary marque. After reviewing the factory exhaust, major flaws were pinpointed in all areas of the design, the sound being the most striking flaw. But also torque curves, peak power, and turbo lag were other areas that could be significantly improved, as well as a 65 percent reduction in weight.

The Sound

The Factory setup produces the most lackluster sound, mainly due to a series of chambers, 600 cell catalysts, and the most prominent flaw being the lack of balance between opposing banks. Seriously, I would recommend when considering any aftermarket exhaust for a Porsche turbo, never buy an exhaust without some kind of gas balance between left and right banks. replacing the stock cats for a choice of 200cpsi, 100cpsi. Replacing the chambered transverse rear silencer with freeflow harmonically tuned silencers enriches the sound, and the addition of our trademark 1D CLR laminar flow X pipe raises the exhaust pitch beyond the region in which bass noise is able to penetrate the cabin, while under hard throttle and high revs, a rich and raucious vocal ensues. This design was pioneered and innovated by Kline.


As a turbo forced induction flat 6, the potential for increasing performance via exhaust and software is huge. The largest gains go up to 42hp and 65nm. In conjunction with software we achieve 75hp and 102nm

100cpsi and 200cpsi produce gains of 16hp and 21hp respectively.


Made in house using genuine aerospace grade Carbon fiber, baked in an autoclave at 10 bar.


Cross Section

Silencer section, cross section 63mm OD

Catalysts come in a variety, from 108mm OD to 127mm OD

manifold primaries, 41mm OD, chosen specifically for faster turbo spool

Turbo back system
Available in standard 304 grade stainless steel, weight 14.5 kg 200cell cats
Inconel 625 formula one grade material, weight 10.2 kg 100 cell cats
Titanium G2 silencer section is also available, weight 11.5 kg

Standard 304 grade stainless, weight 6kg total
Inconel 625, weight, 2.9kg total
Titanium unable to endure extreme heat

Additional information

Weight 25 lbs
Dimensions 45 x 24 x 15 in


There are no reviews yet.

Be the first to review “KLINE Innovations Exhaust – Porsche 997.1 Turbo”

Your email address will not be published. Required fields are marked *

I'm not spambot *

Competition use only parts are clearly labeled as competition use only in the product listing page and may only be used according to the guidelines posted on our Emissions Notice to Customers in California page